• ABS bleeding:ABS brake bleeding to get a firm brake pad after air exhaustion
• Battery configuration
• DPF regeneration and reset:let you perform the D.P.F cleaning to clear the blockage through continuous burning of the particulates captured in the D.P.F filter. When a DPF regeneration cycle is completed, the D.P.F light automatically goes off.
  
• EPB service:allows you to perform the service and maintenance of brake systems,
  including deactivation and activation of the brake control system, bleeding brake fluid, opening and closing brake pads, and setting brakes after disc or pad replacement, on multiple brands of vehicles where electronic brake systems are fitted.
  
• Gear learning:Crankshaft position sensor adaptive learning.
• Injector coding:This function is to reset and match the date after injector is replaced.
• Oil light reset:Allows you to reset the service lamps on the instrument cluster. The Service Indicator System is designed to alert the driver when the vehicle is due for a service.
• SAS,Steering angle sensor:let you perform calibration of the Steering Angle Sensor.
• Throttle body alignment
• TPMS:allows you to check the tire sensor IDs from the vehicle ECU and to perform TPMS programming and reset after tires and/or TPM sensors are replaced and/or tires are rotated.
• Battery management services:Lets you to new battery validated, how to clear faults from the dashboard and display.
• CVT function:This function is used to reset the compensation code and initialize the ECT after a solenoid valve or valve body assembly has been replaced.
• Instrument cluster reset
• Prime fuel pump
• Air flow adjust:Correspondingly change the fuel supply to change the steam production of boiler and maintanin the energy balance in the combustion process.
• Clutch adaptations
• Windows and door functions
• Headlamp leveling
• New turbo function
• Language change
• Lifetime free updates
• Full Vehicle Scan
• Pre and Post scan reports
• Replace airbag ECU model
• AT Adaption
• Tcmoil
• EVAP Test
• etc.

Quick Scan for ABS/SRS/Engine System

Diagnosis for Engine
This check engine code reader will do you a favor to locate the cause and turn off the check engine light with the problem resolved.

Diagnosis for ABS System
Besides read/clear fault codes for ABS system, NT650 Elite also support the following diagnostic functions:

✔ABS Test – tests ABS motors, solenoids, solenoid enable relays, EMBs, and more.
✔ABS Version Test – displays the name of the brake system and the ABS controller version number, software ID, and sequence value.
✔Actuator Test – tests AYC valves, inlet valves, outlet valves, pump motors, and TRACS valves.
✔Auto Bleed Test– removes air from the internal brake fluid chambers after servicing the brakes.

Diagnosis for Airbag System
NT650 Elite airbag scanner allows you to have a deep analysis and detection of your vehicle via reading the fault codes. But sometimes the permanent fault codes in this system will still appear and the warning light flashes after the airbag replacement. Then you will need this srs code reader again to turn the light off.

NOTE: Not applicable to all models. Please check whether it is suitable for your vehicle model before purchasing.