Ancel DS700 Professional Diagnostic Scanner Bi-directional ECU Coding
- Unit Price
Professional Diagnostic Scanner Ancel DS700 Bi-directional ECU Coding
ANCEL DS700, based on the Android 10 System, is a new generation of modular high-end intelligent diagnostic equipment developed by ANCEL, featuring fully updated software and powerful design of widespread vehicle coverage, abundant professional diagnostic features, and exceptional hardware configuration, etc., is the ideal scanner for professional mechanics and auto repair stores to perform all-around fixes and comprehensive tests.
+ Wifi Bluetooth-compatible with 34+ Special Functions
+ ECU Coding
+ 2-Year Free Update Online
+ Android 10.0
+ Multi-Languages Supported
+ 4GB RAM+64GB Storage
+10,000 car models, incl Holden, and Ford AU
ANCEL DS700 OBD2 Full System Diagnostic Scanner Professional For 2017 and later FCA Vehicles with Secure Gateway Module (SGW)
Register with AutoAuth to enable your ANCEL DS700 tablet to communicate with the FCA SGW Authentication System and bypass the SGM, so as to perform diagnostics and bi-directionals without using a bypass cable
ANCEL DS700 Support 34+ Special Functions
1. Oil Reset
The lightening of the car maintenance light indicates that the vehicle needs maintenance. Reset the cluster or driving time to zero after the maintenance, so the maintenance light will go out and the system will start a new maintenance cycle.
2. DPF Regeneration
DPF Regeneration is used to clear PM(Particulate Matter)from the DPF filter through continuous combustion oxidation mode(such as high-temperature heating combustion, fuel additive or catalyst reduce PM ignition combustion)to stabilize the filter performance.
DPF regeneration may be performed in the following cases:
a)The exhaust back pressure sensor is replaced.
b)The PM trap is removed or replaced
c)The fuel additive nozzle is removed or replaced
d)The catalytic oxidizer is removed or replaced.
e)The DPF regeneration MIL is on and maintenance is performed.
f)The DPF regeneration control module is replaced.
3. AFS(headlamp) Reset
The feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lighting angle while monitoring the vehicle speed and body posture.
4. EGR Adaption
This function is used to learn the EGR(Exhaust Gas Recirculation) valve after it is cleaned or replaced.
5. Brake-pad Reset
If the brake pad wears the brake pad sense line, the brake pad sense line sends a signal sense line to the onboard computer to replace the brake pad. After replacing the brake pad, you must reset the brake pad. Otherwise, the car alarms.
Reset must be performed in the following cases:
a)The brake pad and brake pad wear sensor are replaced.
b)The brake pad indicator lamp is on.
c)The brake pad sensor circuit is short, which is recovered.
d)The servo motor is replaced.
6. IMMO Service
To prevent the car from being used by unauthorized keys, the anti-theft key matching function must be performed so that the immobilizer control system on the car identifies and authorizes remote control keys to normally use in the car. When the ignition switch key, ignition switch, combined instrument panel, ECU, BCM, or remote control battery is replaced,anti-theft key matching must be performed.
7. Windows Calibration
This feature is designed to perform door window matching to recover ECU initial memory, and recover the automatic ascending and descending function of the power window.
8. Coolant Bleeding
Use this function to activate the electronic water pump before venting the cooling system.
9. Steering Angle Reset
To reset the steering angle, first find the relative zero point position for the car to drive in a straight line. Taking this position as a reference, the ECU can calculate the accurate angle for left and right steering. After replacing the steering angle position sensor, replacing steering mechanical parts(such as the steering gearbox, steering column, end tie rod, and steering knuckle), performing four-wheel alignment, or recovering the car body, you must reset the steering angle.
10. Injector Coding
Writing injector actual code or rewriting code in the ECU to the injector code of the corresponding cylinder so as to more accurately control or correct cylinder injection quantity. After the ECU or injector is replaced, the injector code of each cylinder must be confirmed or re-coded so that the cylinder can better identify injectors to accurately control fuel injection.
11. Seat Calibration
This function is applied to match the seats with the memory functions that are replaced and repaired.
12. Transport Mode
In order to reduce power consumption, the following functions may be disabled, including limiting the vehicle speed, not waking up the door opening network, and disabling the remote control key, etc. At this time, the transport mode needs to be deactivated to restore the vehicle to normal.
13. Battery Matching
This function enables you to perform a resetting operation on the monitoring unit of the vehicle battery, in which the original low battery fault information will be cleared and battery matching will be done.
Battery matching must be performed in the following cases:
a)Main battery is replaced. Battery matching must be performed to clear original low battery information and prevent the related control module from detecting false information. If the related control module detects false information, it will invalidate some electric auxiliary functions, such as the automatic start&stop function, sunroof without a one-key trigger function, and power window without an automatic function.
b)Battery monitoring sensor. Battery matching is performed to re-match the control module and motoring sensor to detect battery power usage more accurately, which can avoid an error message displaying on the instrument panel.
14. Airbag Reset
This function resets the airbag data to clear the airbag collision fault indicator. When the vehicle collides and the airbag deploys, the corresponding fault code of the collision data appears, the airbag indicator lights up, and the fault code can't be cleared. Since the data inside the airbag computer is disposable, it is required that all new accessories must be replaced, but after performing this function, the data of the airbag computer can be recovered and the fault code can be cleared, the airbag light will go out, and the airbag computer can continue to use.
15. Tyre Reset
This function is used to set the size parameters of the modified or replaced tire.
16. Cluster Reset
a)cluster reset is to copy, write, or rewrite the value of kilometers in the chip of the cluster by using a car diagnostic computer and data cable so that the cluster shows the actual cluster.
b)Usually when the cluster is not correct due to the damaged vehicle speed sensor or cluster failure, it is necessary to do a cluster reset after maintenance.
17. ABS Bleeding
When the ABS contains air, the ABS bleeding function must be performed to bleed the brake system to restore ABS brake sensitivity. If the ABS computer, ABS pump, brake master cylinder, brake cylinder, brake line, or brake fluid is replaced, the ABS bleeding function must be performed.
18. Gear Learning
The crankshaft position sensor learns crankshaft gear machining tolerance and saves to the computer from more accurately diagnosing engine misfires. lf gear learning is not performed for a car equipped with a Delphi engine, the MlL turns on after the engine is started. The diagnostic device detects the DTC P1336'gear not learned'. In this case, you must use the diagnostic device to perform gear learning for the car. After gear learning is successful, the MIL turns off. After the engine ECU, crankshaft position sensor, and crankshaft flywheel are replaced, or the DTC 'gear not learned" is present, gear learning must be performed.
19. Language Change
This function is used to change the system language of the vehicle's central control panel.
20. Adblue Reset
After the diesel exhaust treatment fluid (car urea) is replaced or filled up, the urea reset operation is required.
21. Electric Throttle Adaption
Electric Throttle Adaption is to utilize the car decoder to initialize the throttle actuator so that the learning value of the ECU returns to the initial state. By doing these, the movement of the throttle (or idle motor)can be more accurately controlled, thus adjusting the intake volume.
22. Suspension Matching
This function can adjust the height of the body. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.
23. A/F Reset
This function is applied to set or learn Air/Fuel ratio parameters.
24. Nox Sensor Reset
A NOx sensor is a sensor used to detect the content of nitrogen oxides (NOx)in engine exhaust. If the NOx fault is re-initialized and the NOx catalytic converter is replaced, it is necessary to reset the catalytic converter learned value stored in the engine ECU.
25. TPMS Reset
After the tire pressure, MIL turns on and maintenance is performed, the tire pressure resetting function must be performed to reset the tire pressure and turn off the tire pressure MIL. Tire pressure resetting must be performed after maintenance is performed in the following cases: tire pressure is too low, tire leaks, tire pressure monitoring device is replaced or installed, the tire is replaced, a tire pressure sensor is damaged, and the tire is replaced for the car with tire pressure monitoring function.
This function can complete the gearbox self-learning to improve gear-shifting quality. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shifting delay or impact problems. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
27. Sunroof Initialization
This function can set the sunroof lock off, closed it when it rains, slide/tilt the sunroof memory function, temperature threshold outside the car, etc.
28. Stop/Start Reset
This function is used to open or close the automatic start-stop function via setting the hidden function in ECU(provided that the vehicle has a hidden function and is supported by hardware)
And many more......
NOTE: Not applicable to all models. Please check whether it is suitable for your vehicle model before purchasing.